FREE SHIPPING ON ORDERS OVER $299
No Duty/No Custom Fees

BI-XENON: MORIMOTO MINI D2S 5.0

BI-XENON: MORIMOTO MINI D2S 5.0
BI-XENON: MORIMOTO MINI D2S 5.0
BI-XENON: MORIMOTO MINI D2S 5.0
BI-XENON: MORIMOTO MINI D2S 5.0
BI-XENON: MORIMOTO MINI D2S 5.0
BI-XENON: MORIMOTO MINI D2S 5.0

BI-XENON: MORIMOTO MINI D2S 5.0

Regular price
$230.00
Sale price
$230.00
Unit price
per 
SKU: 2 × PR56
Shipping calculated at checkout.

DESCRIPTION

DESCRIPTION

High Five! If you’re looking for the ultimate beam pattern boner; it’s really not going to get any better than this folks. Perfectly balanced low beam. Hyper spot high beam. The crispiest ECE style cutoff. Unquestionable OEM-quality…all packed into a projector that’s undeniably easy to install. If we died and went to headlight heaven, the 5.0 would be greeting us at the gate.

Projector-Perfection: There are other projectors that produce brighter hot spots. There are other projectors that have unholy amounts of width….But no other option creates the perfect balance of width & hotspot lux (aka distance) quite like the 5.0. In order to create the ultimate weapon for driving in the dark, we've baked in best practices from a variety of well-respected OEM and aftermarket projectors.

Distance: Distance: The hot spot on the new 5.0 bi-xenon is roughly 70% brighter than the already-impressive 4.0 design. While the high beam unloads a lot more volume of light; virtually no additional intensity has been reserved. What that means: You get the maximum benefit from your bulbs & ballasts in low beam mode…where drivers spend 99% of their time. The controlled decrease in intensity from the hyper-hotspot down through the foreground results in a distribution of light that makes driving at night very comfortable & safe. Why? Because too much intensity on the ground too close to the front of your vehicle will make your eyes adjust, compromising your ability to see very far. Science!

Width: Power is nothing without control, and even the best D2S bulbs and 50w ballasts won’t always result in a satisfying output when projected out on the road improperly…so the KEY is really how that light is deployed. Thanks to the beauty in the center of this beast [all new optics package + flat cast cutoff shield] You really end up with a beam pattern that’s extremely wide and flat, with zero bowing. But that’s not all: The position of the shield has been fine-tuned so that there is a band of intense light that spans side-to-side directly under the cutoff line. RX350 Bi-xenons, S2000’s, LS430s, SC430’s….all of the best from Koito now need to bite their tongue, because that’s all they had on Morimoto prior to the 5.0 party!

Anti-Reflective Coating Lens: The blue tint to the lens is more than marketing fluff too. That’s an AR coating, and it serves a real purpose. AR coatings increase the transmission of light through the glass all while decreasing bleed. The result? 10% more light and less glare compared to a traditional clear lens.

Hardware Upgrades: Forget the finicky 2 piece bulb holders found on the 4.0s, these come standard with the MotoHolders – an all-new one-piece design that’s far easier to work with. The new CNC machined aluminum lock rings are not only pretty looking, but they’re 300% stronger than the old die cast part. To tighten them, we now offer an optional lock-ring tightening tool that works with any 10mm socket set. Torx screws now hold the lens holder on too instead of Philips screws. While the 5.0 get’s a big boost in the performance department, it’s also clear we’ve paid attention to the details in the parts department too.

Installation Summary: On a H4-based headlight reflector for example...Remove the headlight lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, add the alignment plate, tighten the lock ring, and re-seal the headlights. For other applications, minimal cutting will probably be involved but you'll find the results well worth it! Check out the installation procedure linked above.

Overview Video: Check out this helpful video to see how easy Mini D2S projectors are to install! (filmed with a 4.0, but the 5.0 mounts identically)

Benchmark: Morimoto. The Automotive Lighting Benchmark. We are globally recognized as the brand to beat. No other brand blends performance and genuine product quality quite like us. Our vast product line has something for nearly every application, and if not; our R&D department is capable of producing it in short order. Contact us and learn what we can do for you!

 

 

 

WHAT'S INCLUDED

WHAT'S INCLUDED

PROJECTORS: 2x Mini D2S 5.0 Bi-xenon
HARDWARE: 2x EZ Lock Rings, MotoHolder, Etc
SOLENOID INPUTS: 2x 9006 Male Pigtails
WARRANTY: 18 Months

COMPATIBILITY

COMPATIBILITY

APPLICATIONS: Universal (cars/trucks/motorcycles)
DIRECT FITMENT: H4, H7 Headlights (little/no mods required)
MODS REQUIRED: H1,H7,H11,H13,9005,9006,9007 housings
OUTPUTS: Low and High Beam
UNITED STATES: LHD (Left Hand Drive))
AU, UK, JAPAN: RHD (Right Hand Drive)
BULBS: D2S/D2H HID Only
HID SYSTEMS: 35w and 55w
SHROUDS: All Styles Except Mini Gatling/Graphite
CENTRIC RINGS: Not Required
CERTIFICATIONS: Exceeds DOT requirements

TECHNICAL

TECHNICAL

HEIGHT: 85mm
WIDTH: 101mm
DEPTH: 142mm
LENS DIAMETER: 3.0"
MOUNTING SHAFT: Diameter = 35mm
LOCK NUT: CNC Aluminum
HOUSING DEPTH: 117mm Minimum
STANDARD LENS: AR Coated Kuria Optic